AT PRO™

USA
Bring Hunted-Out Sites Back to Life. Waterproof to 10 Feet!
PN
1140460
MSRP
$685.82 (U.S.)

MS-2 Headphones
Included!


Volume control to enhance weak signals. Comfortable headband and ear cushions.

$59.95 value!
ALL TERRAIN ADVENTURE.

Fast recovery speed, target separation, and detection depth. Submersible to

10 feet
Click to Explore the AT PRO™
Find out more about key features and the technology behind the AT PRO™ by clicking on the buttons below.
+
+
+
+

Escape From Routine

PRO MODE AUDIO
Proportional Audio response and Tone Roll Audio features allow user to hear subtle changes in target’s response to better judge conductivity, size, shape, and depth.
AT PRO™ Iron Audio
Hear the iron trash before you dig it!

Iron Audio allows you to hear discriminated iron (normally silenced) to avoid digging undesired flat iron targets such as bottle caps or washers.

NOTE: To use the Iron Audio feature, some degree of Iron Discrimination must be set. In this demonstration, the Iron Discrim setting is at 35. Without Iron Audio, both the bottle cap and silver coin sound like good targets. With the Iron Audio, the bottle cap response includes iron “grunts” to indicate this might be a trash target.
CLICK ABOVE FOR IRON AUDIO™ DEMONSTRATION!
Proportional Audio Feature
The AT Pro™ features advanced, proportional (Pro) audio modes. This allows the user to hear subtle changes in a target’s response. Proportional audio also helps the user to better judge a target’s size, shape and depth and has the additional benefit of a much faster recovery time when detecting adjacent targets.

箴™还包括三个标准audio modes, which provide a full-strength beep regardless of a target’s amplitude. Many detectorists prefer this simpler, binary (either on or off ) target response.
AT PRO™ Additional Features
High-Res Iron Discrim
40 levels of iron discrimination provide the fine resolution needed to separate a good target from iron trash
Fast Track Ground Balance
Automatic feature that allows the user to quickly ground balance the detector in mineralized soil conditions.
Digital Target ID
Numeric identification scale from 0 to 99. Identifies a target metal’s conductivity.
Electronic Pinpointing
This non-motion All-Metal Mode function is used to precisely locate a detected target’s position.
AT Pro Instructional Video Part 4
Garrett AT PRO Fresh Water Hunting
Seeing signs pays off... twice!
Aquachigger Video: My best coin day... E.V.E.R...